light touc h switches/evpaf design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es83 ? e 1 v 2 p 345678 af product code type height 9 note: non wash able speci? cations features external dimensions: 3.0 mm 2.6 mm, height 0.65 mm high operability equipped with an actuator (push plate) low temperature use explanation of part numbers 3.0 mm 2.6 mm smd light touch switches type: evpaf recommended applications operation switches for portable electronic equipment (mobile phone, portable audio) type snap action / p ush-on type spst electrical rating 10 a 2 vdc to 20 ma 15 vdc (resistive load) contact resi stance 500 m max. insulation resistance 50 m min. (at 100 vdc) dielectric with stand ing voltage 250 vac for 1 minute bouncing 10 ms max. (on, off) mechanical operating force 1 .3 n, 1. 6 n, 2.4 n, 3.4 n travel 0.15 mm en du ra nc eo pe ra ti ng li fe 1. 3 n, 1. 6 n, 3. 4 n : 1 00000 cycles min., 2.4 n : 500000 cycles min. operating temp erature ?40 c to +85 c storage te mperature ?40 c to +85 c (bulk) ?20 c to +60 c (taping) minimum quantity/packi ng unit 8000 pcs. embossed taping (reel pack) qu an ti ty /c ar to n 4 0000 pcs. oct. 2012 00
light touc h switches/evpaf design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es84 ? circuit diagram pwb land pattern for reference b' a' b a 0.48 4-0.35 2-3.4 2.6 3 4-0.5 2-1.8 b' a' b a 0.65 0.70 (push plate) (without the remainder of the gate) (adhesive) ( 0.75) part of a-a' terminal is exposed at area. any land pattern or vias shall not be provided at area. (0.4) (0.65) (0.8) (1.15) (1.5) (2-2.5) 2-2.4 0.05 2-3.5 0.05 2-1.2 0.05 2-2.4 0.05 a bb' a' 1.6 2.6 circuit diagram pwb land pattern for reference b' a' b a 0.44 4-0.35 2-3.4 2.6 3 4-0.5 2-1.8 b' a' b a 0.65 0.65 (push plate) (without the remainder of the gate) (adhesive) ( 0.75) part of a-a' terminal is exposed at area. any land pattern or vias shall not be provided at area. (0.4) (0.65) (0.8) (1.15) (1.5) (2-2.5) () evpafkb65 4-0.35 +0.1 ?0.15 2-2.4 0.05 2-3.5 0.05 2-1.2 0.05 2-2.4 0.05 a bb' a' 1.6 2.6 dimensions in mm (not to scale) part numb ers operating force height operating life evpafkb65 1.3 n 0.65 mm 1 00000 cycles evpaffb65 1.6 n 0.65 mm 1 00000 cycles part numb ers operating force height operating life ev pa f5 b7 0 3.4 n 0.7 mm 1 00000 cycles ev pa f7 b7 0 2.4 n 0.7 mm 5 00000 cycles no. 1 evpaf ( embossed taping) with j-bent terminals no. 2 evpaf ( embossed taping) with j-bent terminals oct. 2012 00
light touc h switches/evpaf design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es85 ? soldering time (s) (normal temp.) fan or normal temp. 180 operation top ( c) 260 max. 150 90 30 40 10 230 f 1.5 to f 2.0 r0.3 mm 0.05 mm t w a b e c d r t 2-2.4 0.05 2-3.5 0.05 2-1.2 0.05 2-2.4 0.05 b' a' b a a bb' a' 1.6 2.6 0.39 4-0.3 2-3.4 2.6 3 4-0.5 2-1.8 (0.4) (0.65) (0.8) (1.15) (1.5) (2-2.5) b' a' b a 0.65 0.65 (push plate) circuit diagram (without the remainder of the gate) (adhesive) ( 0.75) +0.15 ?0.1 pwb land pattern for reference part of a-a' terminal is exposed at area. any land pattern or vias shall not be provided at area. p 2 p 0 p 1 t 2 t 1 f d 0 a b feeding hole chip component tape running direction chip pocket f w e tape width=12.0 mm embossed carrier tap ing recommended re? ow soldering conditions part no. height a b w f e p 1 p 2 p 0 d 0 dia t 1 t 2 evpaf evp0af 0.65/0.70 3.750.2 2.950.2 12.00.3 5.50.1 1.750.1 8.00.1 2.00.1 4.00.1 1.50.3 0.30.1 0.80.2 unit: mm standard reel dimensions in mm (not to scale) item a b c d e rate (mm) 380.02.0 80.01.0 13.00.5 21.01.0 2.00.5 item w t t r rate (mm) 13.51.0 17.51.0 __ recommended shape of test pole part numb ers operating force height operating life evp0afb65 1.6 n 0.65 mm 5 00000 cycles evpaf7b65 2.4 n 0.65 mm 5 00000 cycles EVPAF5B65 3.4 n 0.65 mm 1 00000 cycles no. 3 evpaf low pro? le ( embossed taping) with j-bent terminals oct. 2012 00
|